Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-STABLE #1 r250777: Sat May 18 17:41:39 EDT 2013
    root@freebsd9.tog.net:/usr/obj/usr/src/sys/storage1 amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: AMD Opteron(TM) Processor 6212                  (2600.05-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x600f12  Family = 0x15  Model = 0x1  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>>
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33091043328 (31558 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <083112 APIC1535>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
 cpu0 (BSP): APIC ID: 32
 cpu1 (AP): APIC ID: 33
 cpu2 (AP): APIC ID: 34
 cpu3 (AP): APIC ID: 35
 cpu4 (AP): APIC ID: 36
 cpu5 (AP): APIC ID: 37
 cpu6 (AP): APIC ID: 38
 cpu7 (AP): APIC ID: 39
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
kbd1 at kbdmux0
acpi0: <SMCI > on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of ffe50000, e060 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
mps0: <LSI SAS2008> port 0xa000-0xa0ff mem 0xfdd3c000-0xfdd3ffff,0xfdd40000-0xfdd7ffff irq 24 at device 0.0 on pci1
mps0: Firmware: 14.00.00.00, Driver: 14.00.00.01-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mps1: <LSI SAS2008> port 0xb000-0xb0ff mem 0xfde3c000-0xfde3ffff,0xfde40000-0xfde7ffff irq 28 at device 0.0 on pci2
mps1: Firmware: 14.00.00.00, Driver: 14.00.00.01-fbsd
mps1: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib3: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mps2: <LSI SAS2008> port 0xc000-0xc0ff mem 0xfe83c000-0xfe83ffff,0xfe840000-0xfe87ffff irq 44 at device 0.0 on pci3
mps2: Firmware: 14.00.00.00, Driver: 14.00.00.01-fbsd
mps2: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib4: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection 7.3.7> port 0xd800-0xd81f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 48 at device 0.0 on pci4
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: 00:25:90:80:b4:84
pcib5: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pci5: <ACPI PCI bus> on pcib5
em1: <Intel(R) PRO/1000 Network Connection 7.3.7> port 0xe800-0xe81f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 47 at device 0.0 on pci5
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: 00:25:90:80:b4:85
ahci0: <ATI IXP700 AHCI SATA controller> port 0x9000-0x9007,0x8000-0x8003,0x7000-0x7007,0x6000-0x6003,0x5000-0x500f mem 0xfebfbc00-0xfebfbfff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfebf9000-0xfebf9fff irq 16 at device 18.0 on pci0
usbus0 on ohci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfebfa000-0xfebfafff irq 16 at device 18.1 on pci0
usbus1 on ohci1
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfebfb800-0xfebfb8ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfebf7000-0xfebf7fff irq 18 at device 19.0 on pci0
usbus3 on ohci2
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfebf8000-0xfebf8fff irq 18 at device 19.1 on pci0
usbus4 on ohci3
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfebfb400-0xfebfb4ff irq 19 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xfdffc000-0xfdffffff,0xfe000000-0xfe7fffff irq 20 at device 4.0 on pci6
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfebf6000-0xfebf6fff irq 18 at device 20.5 on pci0
usbus6 on ohci4
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub6: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ugen3.2: <Winbond Electronics Corp> at usbus3
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus3
ums0: 3 buttons and [XYZ] coordinates ID=0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus3
kbd2 at ukbd0
da0 at mps0 bus 0 scbus0 target 0 lun 0
da0: <SEAGATE ST1000NM0001 0002> Fixed Direct Access SCSI-6 device
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
cd0 at ata0 bus 0 scbus7 target 1 lun 0
cd0: <MATSHITA DVD-ROM UJ890AC 1.00> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da1 at mps0 bus 0 scbus0 target 1 lun 0
da1: <SEAGATE ST1000NM0001 0002> Fixed Direct Access SCSI-6 device
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da2 at mps0 bus 0 scbus0 target 4 lun 0
da2: <SEAGATE ST1000NM0001 0002> Fixed Direct Access SCSI-6 device
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da4 at mps1 bus 0 scbus1 target 2 lun 0
da4: <SEAGATE ST1000NM0001 0002> Fixed Direct Access SCSI-6 device
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da6 at mps1 bus 0 scbus1 target 4 lun 0
da6: <SEAGATE ST1000NM0001 0002> Fixed Direct Access SCSI-6 device
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da5 at mps1 bus 0 scbus1 target 3 lun 0
da5: <SEAGATE ST1000NM0001 0002> Fixed Direct Access SCSI-6 device
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da7 at mps1 bus 0 scbus1 target 5 lun 0
da7: <SEAGATE ST1000NM0001 0002> Fixed Direct Access SCSI-6 device
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da8 at mps2 bus 0 scbus2 target 0 lun 0
da8: <ATA OCZ-VERTEX4 1.5> Fixed Direct Access SCSI-6 device
da8: 600.000MB/s transfers
da8: Command Queueing enabled
da8: 244198MB (500118192 512 byte sectors: 255H 63S/T 31130C)
ada0 at ahcich2 bus 0 scbus5 target 0 lun 0
da9 at mps2 bus 0 scbus2 target 1 lun 0
da9: <ATA OCZ-VERTEX4 1.5> Fixed Direct Access SCSI-6 device
da9: 600.000MB/s transfers
da9: Command Queueing enabled
da9: 244198MB (500118192 512 byte sectors: 255H 63S/T 31130C)
ada0: <SanDisk SDCFH-002G HDX 6.02> CFA-4 device
ada0: 300.000MB/s transfers (SATA 2.x, WDMA2, PIO 512bytes)
ada0: 1907MB (3906560 512 byte sectors: 16H 63S/T 3875C)
ada0: Previously was known as ad8
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1300026522 Hz quality 1000
da3 at mps0 bus 0 scbus0 target 5 lun 0
da3: <SEAGATE ST1000NM0001 0002> Fixed Direct Access SCSI-6 device
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
Trying to mount root from ufs:/dev/ada0p2 [rw]...
WARNING: / was not properly dismounted